Your Choice for Split Type Cooling Systems

WKSL Product Page Split Systems

When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. The WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed to, when installed in a properly constructed enclosure provide a constant selectable temperature between 48° and 63° Fahrenheit while maintaining 50 to 75 percent relative humidity.

WKSL 2200

WKSL 4000

WKSL Series systems are designed for easy installation by any, properly equipped and qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring
connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical sources. These systems must be charged with refrigerant during installation. The WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions.

There are two models to choose from: All units are 115 Volt, 60 Hz.
*WKSL includes Fan/Coil & Condenser

Enclosure Electrical    Dimensions (in) Weight
Model              Volume (max)
WKSL 2200
Fan/Coil            265 cu.ft.            1 Amp          14.25W x 14.125H x 7.75D               25 lb.
WKSL 2200
Condenser 265 cu.ft.             4 Amps 14.25W x 14.125H x 11.00D             35 lb.